PWO 24 (Bales) - Kröger Nutzfahrzeuge [EN]

Technical data

Load capacity
Permissible total weight:	24,000 kg
Empty weight*:	approx. 4,850 kg
Payload:	approx. 19,150 kg

Dimensions
Total vehicle length*:	approx. 11,670 mm
Total vehicle width:	approx. 2,470 mm (outside)
Load length*:	approx. 9,850 mm
Platform height*:	approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO24 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres	6 x 385/65 R22.5 factory refurbished tyres on centre well rims 80 km/h permitted
Axles	ADR tapered roller bearing axle, 3 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs	2-layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h, overload protection on all 6 springs, rocker arms between the 2nd and 3rd axle
Steering	Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, Height adjustable as well as drawbar relief
Brake system	dual line service brake system with automatic load-dependent brake force control (ALB), 2x, 6 x diaphragm brake cylinder; spindle parking brake acting on 2nd axle
Chassis frame	welded steel construction; double T main load bearer
Plateau	4 mm steel floor, 6 x lashing points on the outer side frame profile (12 x in total)
Electrical system:	12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories	stable underride protection, number plate bracket, wheel chocks with bracket, plastic mudguard at the rear, park sockets for all connections on the drawbar
Paintwork	vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality two-component gloss paint Colouring: Kröger green

Additional equipment

To prepare the PWO24 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

	SUPERSTRUCTURE
	A 100P1	Fixed, anodised aluminium front wall, 800 mm high
	A 101P1	Fixed, anodised aluminium front wall, 1000 mm high
	A 114P1	Cargo area reduction according to customer requirement instead of 9850 mm (custom-built)
	A 116P1	Loading area extension to 10,000 mm instead of 9850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P1)
	A 170P1	Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P1 or A 101P1)
	A 171P1	Foldable frame board walls on the sides and rear approx. 800 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P1 or A 101P1)
	A 172P1	Foldable frame board walls on the sides and rear approx. 1000 mm high (box transport), incl. foldable and removable posts (only in combination with A 101P1)
	A 250P1	Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P1 or A 101P1)
	A 251P1	Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P1 or A 101P1)
	A 259P1	Lateral left + right screwable support edge made of C-profile (steel) and 25mm corrugation (hot-dip galvanised), inner width approx. 2420mm, mounted on the outer frame profile in the row of holes for lashing points incl. fastening possibility for lashing strap.
	A 263P1	Additional lashing points in the outer frame profile (standard = 12 pieces, 6 pieces per side), price per piece
	A 264P1	14 x additional lashing points on both sides in the outer frame profile (40 x in total)
	A 266P1	Additional tensioning strap on each side between the bale supports at a height of 1,000 mm (only in combination with A 550P1)
	A 268P1	Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
	A 269P1	Lateral support edge (galvanized steel), screw-on version on left + right, edge dimensions approx. 30 mm W x 35 mm H, interior width approx 2410 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing square bales
	A 270P1	Mobile aluminium stepladder clamped onto the chassis
	A 275P1	Extension ladded installed on the side underneath the chassis for access to the cargo area
	A 295P1	Gas pressure springs mounted on both sides of side drop sides (2 pieces per drop side, 8 pieces in total, only in connection with frame drop sides)
	A 296P1	Gas pressure springs mounted on both sides of side drop sides (2 pieces per drop side, 12 pieces in total, only in connection with aluminium drop sides)
	A 350P1	Hydraulically lowerable square tube (galvanised) on both sides over the whole length for load securing, front and rear board walls designed as grid frames approx. 1000 mm high (box transport)
	A 361P1	Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2,200 mm high (horizontal partitioning with screw flange)
	A 365P1	Hydraulic bale transport securing system on both sides with lowerable gates made of steel pipes over the whole length, front and rear board walls designed as fixed bale gates approx. 2200 mm high (horizontal partitioning with screw flange, only in combination with F 300P1 or F 305P1)
	A 370P1	Screw-on bale grille elevation 300 mm at the front and rear (only in comb. with A 361P1 or A 365P1)
	A 382P1	Square tubes on both sides that can be lowered, galvanized instead of painted (only in combination with A 350P1)
	A 550P1	Bale supports front and rear with adjustable tilt, rear bale support with 1,100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in combination with board walls or hydr. bale transport securing system)
	A 650P1	Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A 100P1 or A 101P1 equipment)
	Info:	When using equipment A 170P1, A 171P1, A 172P1, A 250P1, or A 251P1, the max. possible tyre width is 500 mm with an offset + 30 mm.
	CHASSIS
	F 130P1	Towing device at the rear
	F 180P1	Plastic mudguards for the front axle (quarter circle)
	F 189P1	Plastic mudguards (quarter circle) additionally mounted on the second axle
	F 270P1	Side collision protection (not necessary behind an agricultural or forestry tractor)
	F 285P1	Drawbar support for drawbar type Klemmfix
	F 290P1	Toolbox plastic Dimensions: 630 W x 480 D x 450 H
	F 300P1	Length-adjustable Y-type drawbar, adjustment range 1500 - 2100mm, supply cables designed as coiled cables
	F 305P1	Reinforced Y-drawbar (26 tonnes), 1900 mm long
	F 460P1	Automatic parking brake (spring-type cylinder)
	F 465P1	Separate release valve for front axle
	F 468P1	Brake system with Duomatik couplings
	F 510P1	Side marking lights (LED)
	F 516P1	Position and number plate lights as LED version
	F 518P1	3 function rear lights, angular, LED version
	F 521P1	2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
	F 523P1	2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
	F 526P1	Protective grids for the rear lights, screw-on version (not permitted on German public roads)
	F 527P1	Separate switching box with 3x toggle switches (on+off) consisting of 1x main switch and 2x for electrical functions (power supply via 3-pin socket, 12 volt)
	F 529P1	Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
	F 632P1	12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
	F 645P1	9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
	F 673P1	Rear axle forced-steered, 9 tonnes ADR forced-steering axle (max. 60 km/h), 2050 mm track, wheel brake 406 x 120 mm, 130 mm, square axle (Ackerman steering)
	F 906P1	Protective covers for steering axle brake cylinder (only in combination with F 673P1)
	F 915P1	Rubber buffer mounted on the rear axle
	F 916P1	Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
	WHEELS
	R 200P1	Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Pro Trailer (EU Tyre Label B,A,70)
	R 220P1	Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
	R 239P1	Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
	R 240P1	Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
	R 243P1	Tyres, "new" 500/60R22.5 NOKIAN Country King (40 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
	R 245P1	Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with imprint depth ID + 30 mm, i.e. track gets narrower
	R 246P1	Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
	R 259P1	Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 100 mm)
	PAINTWORK
	L 145P1	Special paintwork, chassis and superstructure according to RAL tone
	L 150P1	Stone chipping protection coating under the superstructure in the area above the wheels
	EXPERT'S REPORT/HANDING OVER
	T 150P1	Expert's report for 40 km/h registration (net price cannot be discounted)
	T 200P1	Expert's report for 60 km/h registration (net price cannot be discounted)
	T 420P1	Dekra load-securing certificate (net price cannot be discounted, only possible in combination with A 361P1 & A 365P1)
	T 900P1	Transport costs, German post code 0-4 (net price cannot be discounted)
	T 910P1	Transport costs, German post code 5-9 (net price cannot be discounted)