PWO 18

Technical data
Load capacity  
Permissible total weight: 18,000 kg
Empty weight*: approx. 4,550 kg
Payload: approx. 13,450 kg
Dimensions  
Total vehicle length*: approx. 11,670 mm
Total vehicle width: approx. 2,470 mm (outside)
Load length*: approx. 9,850 mm
Platform height*: approx. 1,300 mm

* = depending on equipment.

Basic version

The basic version of the PWO18 offers a solid foundation for many purposes with an attractive price/performance ratio. Included in the basic version are:

Add to notelist

Tyres 4 x 385/65 R22.5 factory refurbished tyres on centre well rims 80 km/h permitted
Axles ADR tapered roller bearing axle, 2 x 11.3 tonnes axle load (105 km/h), 2050 mm track width without ABS up to 60 km/h, wheel brake 406 x 120 mm, 130 mm square axle
Springs 18 tonnes 2 layer parabolic spring suspension, 100 mm wide, approved for up to 105 km/h
Steering Turntable steering with ball bearing turntable and type-tested triangular drawbar 1,990 mm, Height adjustable as well as drawbar relief
Brake system dual line service brake system with automatic load-dependent brake force control (ALB), 4 x diaphragm brake cylinder, spindle parking brake for the rear axle
Chassis frame welded steel construction; double T main load bearer
Plateau 4 mm steel floor, 6 x lashing points on the outer side frame profile (12 x in total)
Electrical system: 12 volt system according to the guidelines of the StVZO (German traffic laws) with 7-pin connecting cable, triangular reflector and yellow side reflectors, 3 function lights (rubber mounted), number plate lights, position lights
Accessories stable underride protection, number plate bracket, wheel chocks with bracket, plastic mudguard at the rear, park sockets for all connections on the drawbar
Paintwork vehicle blasted with steel grit and also degreased, chip-resistant primer, sealing of areas in particular risk of corrosion using bodywork sealing compound, top coat in German quality dual-component gloss paint Colouring: Kröger green
Additional equipment

To prepare the PWO18 in the best way for special tasks, we offer a wide range of options:

(You can add the individual items of optional equipment to the wish list using the + symbol.)

SUPERSTRUCTURE
A 100P Fixed, anodised aluminium front wall, 800 mm high
A 101P Fixed, anodised aluminium front wall, 1000 mm high
A 114P Cargo area reduction according to customer requirement instead of 9850 mm (custom-built)
A 116P Loading area extension to 10,000 mm instead of 9850 mm through 150 mm bolted spacer plate (only possible in combination with F 300P)
A 170P Foldable frame board walls on the sides and rear approx. 600 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P or A 101P)
A 171P Foldable frame board walls on the sides and rear approx. 800 mm high (box transport), incl. foldable and removable posts (only in combination with A 100P or A 101P)
A 172P Foldable frame board walls on the sides and rear approx. 1000 mm high (box transport), incl. foldable and removable posts (only in combination with A 101P)
A 250P Anodised aluminium board walls 600 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
A 251P Anodised aluminium board walls 800 mm high, 3 x sides, 1 x rear, foldable and removable, including foldable and removable posts (only in combination with A 100P or A 101P)
A 259P Lateral left + right screwable support edge made of C-profile (steel) and 25mm corrugation (hot-dip galvanised), inner width approx. 2420mm, mounted on the outer frame profile in the row of holes for lashing points incl. fastening possibility for lashing strap
A 263P Additional lashing points in the outer frame profile (standard = 12 pieces, 6 pieces per side), price per piece
A 264P 14 x additional lashing points on both sides in the outer frame profile (40 x in total)
A 266P Additional tensioning strap on each side between the bale supports at a height of 1,000 mm (only in conjunction with A 550P)
A 268P Lateral support edge (steel), screw-on version on left + right, edge dimensions approx. 70mm W x 60 mm H, interior width approx 2330 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing round bales
A 269P Lateral support edge (galvanized steel), screw-on version on left + right, edge dimensions approx. 30 mm W x 35 mm H, interior width approx 2410 mm, installed on the outer frame profile in the row of holes for lashing points incl. mounting options for lashing strap for transporting standing square bales
A 270P Mobile aluminium stepladder clamped onto the chassis
A 275P Extension ladded installed on the side underneath the chassis for access to the cargo area
A 295P Gas pressure springs mounted on both sides of side drop sides (2 pieces per drop side, 8 pieces in total, only in connection with frame drop sides)
A 296P Gas pressure springs mounted on both sides of side drop sides (2 pieces per drop side, 12 pieces in total, only in connection with aluminium drop sides)
A 350P Hydraulically lowerable square tube (painted) on both sides over the whole length for load securing, front and rear board walls designed as grid frames approx. 1000 mm high (box transport)
A 361P Hydraulic bale transport securing system on both sides over the whole length, front and rear board walls designed as fixed bale grids approx. 2200 mm high (horizontal partitioning with screw flange)
A 365P Hydraulic bale transport securing system on both sides with lowerable gates made of steel pipes over the whole length, front and rear board walls designed as fixed bale gates approx. 2200 mm high (horizontal partitioning with screw flange, only in combination with F 300P or F 305P)
A 370P Screw-on bale grille elevation 300 mm at the front and rear (only in comb. with A 361P or A 365P)
A 382P Square tubes on both sides that can be lowered, galvanized instead of painted (only in combination with A 350P1)
A 550P Bale supports front and rear with adjustable tilt, rear bale support with 1100 mm extension, folding and locking swivel rungs with tensioning straps for securing the load from the side (not in combination with board walls or hydr. bale transport securing system)
A 650P Catwalk with accident protection bar on the front wall (in accordance with German accident prevention regulations UVV) incl. mounting step on the drawbar (only possible in conjunction with A 100P or A 101P equipment)
Info: When using equipment A 170P, A 171P, A 172P, A 250P, or A 251P, the max. possible tyre width is 500 mm with an offset + 30 mm.
CHASSIS
F 130P Towing device at the rear
F 180P Plastic mudguards for the front axle (quarter circle)
F 189P Plastic mudguards (quarter circle) additionally mounted on the second axle
F 270P Side collision protection (not necessary behind an agricultural or forestry tractor)
F 285P Drawbar support for drawbar type Klemmfix
F 290P Toolbox plastic Dimensions: 630 W x 480 D x 450 H
F 300P Length-adjustable Y-type drawbar, adjustment range 1500 - 2100mm, supply cables designed as coiled cables
F 305P Reinforced Y-drawbar (26 tonnes), 1900 mm long
F 460P Automatic parking brake (spring-type cylinder)
F 464P Additional ALB valve mounted on the rear axle
F 465P Separate release valve for front axle
F 468P Brake system with Duomatik couplings
F 510P Side marking lights (LED)
F 516P Position and number plate lights as LED version
F 518P 3 function rear lights, angular, LED version
F 521P 2 x LED reversing lights on the rear of the vehicle (12 volt 3-pin socket required)
F 523P 2 x LED lateral reversing lights on the chassis (12 volt 3-pin socket required)
F 526P Protective grids for the rear lights, screw-on version (not permitted on German public roads)
F 527P Separate switching box with 3 x toggle switches (on+off) consisting of 1 x main switch and 2 x for electrical functions (power supply via 3-pin socket, 12 volts)
F 529P Hydraulic hose marking "Kennfixx" (price per hydraulic pipe)
F 625P 3 layer parabolic spring suspension, 100 mm wide for 10 tonnes axle load (105 km/h)
F 632P 12.9 tonnes ADR axles (105 km/h), reinforced, 2050 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm, 150 mm square axle
F 645P 9 tonnes GIGANT axles (105 km/h), 2,040 mm track, without ABS and automatic slack adjuster, wheel brake 420 x 180 mm (approved only for tyres up to 445/65 R22.5)
F 915P Rubber buffer mounted on the rear axle
F 916P Plastic wall-protective profile below the side board walls (in conjunction with foldable side board walls)
WHEELS
R 200P Tyres, "new" 385/65R22.5 (105 km/h) manufacturer PIRELLI Pro Trailer (EU Tyre Label B,A,70)
R 220P Tyres, "new" 425/65 R22.5 (105 km/h), (platform height approx. + 40 mm)
R 239P Tyres, "new" 455/40 R22.5 (100 km/h), 160 J TL ADVANCE GL251 Plus EU (Tyre Label C,C,72), (catwalk height approx. - 70 mm)
R 240P Tyres, "new" 445/65R22.5 (105 km/h) (platform height approx. + 50 mm)
R 243P Tyres, "new" 500/60R22.5 NOKIAN Country King (40 km/h), rims with offset + 30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
R 245P Tyres, "new" 560/45 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with imprint depth ID + 30 mm, i.e. track gets narrower
R 246P Tyres, "new" 560/60 R22.5 BKT FLOTATION RADIAL, profile FL 693 M, (70 km/h), rims with offset +30 mm, i.e. track gets narrower (platform height approx. + 100 mm)
R 259P Tyres "new" 560/60R22.5 NOKIAN Country King (65 km/h) 161D with reinforced rims 20.00 (tyre load at 1.5 bar 10 km/h = 5,000 kg) (catwalk height approx. + 100 mm)
PAINTWORK
L 145P Special paintwork, chassis and superstructure according to RAL tone
L 150P Stone chipping protection coating under the superstructure in the area above the wheels
EXPERT'S REPORT/HANDING OVER
T 150P Expert's report for 40 km/h registration (net price cannot be discounted)
T 200P Expert's report for 60 km/h registration (net price cannot be discounted)
T 420P Dekra load-securing certificate (net price cannot be discounted, only possible in combination with A 361P & A 365P)
T 900P Transport costs, German post code 0-4 (net price cannot be discounted)
T 910P Transport costs, German post code 5-9 (net price cannot be discounted)
Downloads

Our PWO18 in action

Would you like to find out more?

There is also a contact person for your region:

Matthias Oelkers
Area sales manager
(DE north - centre - east; DK)
+49 173 / 6484847
Peter Franz
Area sales manager
(DE south - central, AT)
+49 171 / 9572155
Symen van der Veen
Area sales manager
(BE; NL)
+31 6515 72523
Sándor Fazekas
Area sales manager
(BG; CZ; HR; HU; RO; RS; SK; SI)
+49 176 / 66456951
+36 20 427 4211
Markus Borchers
Product manager
+49 177 / 7963617
Julian Franke
Internal sales / shipping

+49 4445 / 96 36 - 39
Oliver Krohse
Head of sales trailers
(DE midwest)
+49 4445 / 96 36 - 24
René Tabeling
Area sales manager
(DE centre - west)
+49 4445 / 9636-68
+49 174/2131461

©2024. Peter Kröger GmbH